Solite Custom Omni Pro 2.0 3mm Hidden Split Toe Boots

3D Molded 3mm Gum Rubber Sole
Like all of the new 2.0 Series boots, the 3mm Custom Omni Pro 2.0 features a one-piece, 3D molded natural rubber sole. The Omni outsole is 3mm thick (versus 1mm on the Custom and Custom Pro boots). The extra sole thickness emphasizes comfort and protection for walking to/from/in the water. The Solite sticky/flexible gum-rubber compound offers maximum traction on wet, uneven surfaces and natural flexibility for barefoot-feeling while walking. The sole wraps up the toes and heel for increased durability and protection against rocks, urchins, and reef.

Custom-Fit 2.0 Thermofoam Sole
Another Solite innovation, their 3-Point Strap anchors under both the arch and heel on the inside of the foot, and under the heel on the outside of the foot. When the strap is tightened, the boot snugs up evenly under the arch and through the rear of the boot, providing instant response and slop-free fit for all arch and ankle profiles. The Solite Floating D-Ring on the strap isn't stitched in place, allowing it to "float" naturally to the optimal position on your foot. Their 3-Point Strap is also 100% Tatex-coated for extra durability and zero water absorption.

Thermal Rebound Lining
For maximum abrasion resistance, Solite uses Tuff-Skin outer lining material on the neoprene upper of the 3mm Omni Pro, providing extra durability when walking through reefs, boulders, and other uneven surfaces. This is the same proven outer lining they use on the 2mm Custom Reef 2.0 and 2mm Custom Omni 2.0 styles.

Tuff-Skin External Lining
The Solite EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, Solite cut no corners on their neoprene seam construction. Their Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with Liquid Seam Seal for maximum durability and longevity.

EZ-O Cuff with Overkill Seams
The Solite EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, Solite cut no corners on their neoprene seam construction. Solite's overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.

Reinforced Stealth-Loop
To ease on/off, Solite integrated their low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and their co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.

Split-Toe Heat-Booster Socks in the Box
The unsung hero of the Solite "System", their Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:

• Makes boots easier on-off and reduces stress on seams
• Increases comfort by providing a soft barrier between the feet and the Thermofoam sole
• Adds warmth to extend session length and comfort
• Absorbs excess water from flushing to prevent puddling in the boots
• Absorbs bacteria to reduce bootie-stink
• Machine wash and dry for convenience